We will start at 8am
I suggest you get there early....first in first out. By following the below instructions we hope to get every one done by 1pm. Please do not come late!!

You will unload your car in the designated area which is the south and west side of parking lot #2 away from the Tech lines. Move your car to the precheck lines which are 200' behind the three Tech lines.

Get your Tech hard card at the registration desk (at the lot entrance). Fill out name, car number and as much car info as you can. Also you will be given a white Precheck Form which you will give to the inspector in one of the three precheck lines where they will check your helmet, gear, car number and log book. Production cars ONLY must have the three part Eligibility Form completely filled out or a 2009 copy stapled in the back of your log book if you have just sent it in.

If all items on the precheck are "yes" then you can proceed to the three Tech lines...two for Prod Cars and one for open wheel cars/sports racers.

Just a few of the items we will check:

Tire valve stems for condition (cracks)
Top of helmet to roll bar
Headrests
Seat securely screwed in the car
Fire system line B-nuts tight and no kinks in lines, E-decal near actuator
Correct placement of fire bottle and nozzles
Correct car number and class (sides and hood or wing plates)
Battery switch on-off decal
Battery in Prod cars two 5/16" bolts hold down minimum and secure
General appearance of car...no primer and clean

Any questions ? just ask beforehand. We expect a lot of cars and hope to run smoothly...we need your co-operation.